INFINITYPOWER / UPS
PowerExpand
10–1,560 kVA
Modular UPS architecture designed around growing power needs.
Request a quote ↗Original catalogue ↗
Models & part numbers
3 catalogue models. Select a model for its own specification table.
Technical labels and values follow the original English catalogue. “/”, blanks and manufacturer inconsistencies are preserved; confirm final model selection with our team.
PowerExpand Series — Technical Specifications
PDF · page 29 ↗| Specification | PEX10-60KVA | PEX10-100KVA | PEX10-200KVA |
|---|---|---|---|
| General | |||
| Capacity(VA/Watts) / HPM module | 10k / 9k, 20k / 18k | 10k / 9k, 20k / 18k | 10k / 9k, 20k / 18k |
| Capacity(VA/Watts) / HPM module | 10k / 9k, 20k / 18k | 10k / 9k, 20k / 18k | 10k / 9k, 20k / 18k |
| INPUT | |||
| Nominal voltage | 380/400/415Vac, (3Ph+N+PE) | 380/400/415Vac, (3Ph+N+PE) | 380/400/415Vac, (3Ph+N+PE) |
| Operating voltage range | 208~478Vac | 208~478Vac | 208~478Vac |
| Operating frequency range | 40~70Hz | 40~70Hz | 40~70Hz |
| Power factor | ≥0.99 | ≥0.99 | ≥0.99 |
| Bypass voltage range | Max.voltage: 220v +25%(optional +10%,+15%,+20% ) 230v 20% (optional +10%,+15%) 240v 15%(optional +10%) Min. voltage: -45% (optional -20%,-30%) Frequency protection range: ±10% | Max.voltage: 220v +25%(optional +10%,+15%,+20% ) 230v 20% (optional +10%,+15%) 240v 15%(optional +10%) Min. voltage: -45% (optional -20%,-30%) Frequency protection range: ±10% | Max.voltage: 220v +25%(optional +10%,+15%,+20% ) 230v 20% (optional +10%,+15%) 240v 15%(optional +10%) Min. voltage: -45% (optional -20%,-30%) Frequency protection range: ±10% |
| Harmonic distortion (THDi) | 2%(100% nonlinear load) | 2%(100% nonlinear load) | 2%(100% nonlinear load) |
| Generator input | Support | Support | Support |
| OUTPUT | |||
| Output voltage | 380/400/415Vac, (3Ph+N+PE) | 380/400/415Vac, (3Ph+N+PE) | 380/400/415Vac, (3Ph+N+PE) |
| Voltage regulation | ±1% | ±1% | ±1% |
| Power factor | 0.9 | 0.9 | 0.9 |
| Output frequency | 1.Line Mode: ±1%,±2%,±4%,±5%,±10% of the rated frequency (optional) 2.Battery Mode: (50/60±0.1%)Hz | 1.Line Mode: ±1%,±2%,±4%,±5%,±10% of the rated frequency (optional) 2.Battery Mode: (50/60±0.1%)Hz | 1.Line Mode: ±1%,±2%,±4%,±5%,±10% of the rated frequency (optional) 2.Battery Mode: (50/60±0.1%)Hz |
| Crest factor | 3:1 | 3:1 | 3:1 |
| Harmonic distortion (THDv) | ≤2% with linear load ≤5% with non linear load | ≤2% with linear load ≤5% with non linear load | ≤2% with linear load ≤5% with non linear load |
| Efficiency | 96.5% | 96.5% | 96.5% |
| BATTERY | |||
| Battery voltage | ±192\±204\±216\±228\±240Vdc; battery quantity(optional) | ±192\±204\±216\±228\±240Vdc; battery quantity(optional) | ±192\±204\±216\±228\±240Vdc; battery quantity(optional) |
| Charge current / UPS cabinet | 18A (Max) | 30A (Max) | 60A (Max.)Follow the catalogue for more information | ||
| Charge current / HPM module | 6A (Max.) (charge current can be set according to battery capacity installed) | 6A (Max.) (charge current can be set according to battery capacity installed) | 6A (Max.) (charge current can be set according to battery capacity installed) |
| Backup time | Depends on the capacity of external batteries | Depends on the capacity of external batteries | Depends on the capacity of external batteries |
| SYSTEM FEATURES | |||
| Transfer time | Utility to Battery : 0ms; Utility to bypass: 0ms | Utility to Battery : 0ms; Utility to bypass: 0ms | Utility to Battery : 0ms; Utility to bypass: 0ms |
| Overload / Bat. Mode | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately |
| Overload / Bat. Mode | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately | Load≤110%: last 10min,≤125%: last 1min, ≤150%: last 1S,≥150% shut down UPS immediately |
| Overload / Bypass Mode | Breaker (10kVA: 20A / 20kVA:40A) | Breaker (10kVA: 20A / 20kVA:40A) | Breaker (10kVA: 20A / 20kVA:40A) |
| Short circuit | Hold whole system | Hold whole system | Hold whole system |
| Nose suppression | Complies with EN62040-2 | Complies with EN62040-2 | Complies with EN62040-2 |
| Communication interface | 1. UPS cabinet : RS232, RS485, Dry Contact, Intelligent slot x 2(SNMP card,Relay card optional) 2. PEX series UPS module: RS232 | 1. UPS cabinet : RS232, RS485, Dry Contact, Intelligent slot x 2(SNMP card,Relay card optional) 2. PEX series UPS module: RS232 | 1. UPS cabinet : RS232, RS485, Dry Contact, Intelligent slot x 2(SNMP card,Relay card optional) 2. PEX series UPS module: RS232 |
| ENVIRONMENTAL | |||
| Operating temperature | 0oC~40oC | 0oC~40oC | 0oC~40oC |
| Storage temperature | -25oC~55oC | -25oC~55oC | -25oC~55oC |
| Humidity range | 0~95% (non-condensing) | 0~95% (non-condensing) | 0~95% (non-condensing) |
| Altitude | <1500m | <1500m | <1500m |
| Noise level | <65dB | <65dB | <65dB |
| PHYSICAL | |||
| Dimension D×W×H (mm) / HPM module | 443x580x131 (3U) | 443x580x131 (3U) | 443x580x131 (3U) |
| Dimension D×W×H (mm) / HPM module | 443x580x131 (3U) | 443x580x131 (3U) | 443x580x131 (3U) |
| Net weight (kg) / UPS cabinet | 149 | 152 | 290Follow the catalogue for more information | ||
| Net weight (kg) / UPS cabinet | 10kVA/26; 20kVA/31 | 10kVA/26; 20kVA/31 | 10kVA/26; 20kVA/31 |
| STANDARDS | |||
| Safety | IEC/EN62040-1,IEC/EN60950-1 | IEC/EN62040-1,IEC/EN60950-1 | IEC/EN62040-1,IEC/EN60950-1 |
| EMC | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 | IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, IEC61000-4-5,IEC61000-4-6,IEC61000-4-8 |
Catalogue features and options · PDF 28
Power Expand Series
--------------------------------------
More Power, More Effciency, Less Space..
Hot Swappable Modular UPS..
PAY AS YOU GROW
10~1560kVA
PEX-PM10kVA | PEX-PM20kVA Power Module
PEX10-30kVA | PEX20-60kVA
PEX10-50kVA | PEX20-100kVA
PEX10-100kVA | PEX20-200kVA
Features
• Hot swap batteries and modules
• High frequency and double conversion
on-line technology
• Advanced PFC technology
• 3U frame, rack-mounted and tower convertible
UPS Cabinet Module Control
• EPO function
Control Panel Panel
• Wide input voltage range
• Fully digitized microprocessor control
• Parallel redundancy
single module(3U)
• Advanced battery management
• Lightning and surge protection, short circuit
and overload protection
• Multilingual LCD and LED display
10KVA / 20KVA 3:3 phase
• EMI/RFI noise filter
• Smart RS232 communication with monitoring
software
• Optional SNMP card slot
Battery Cabinets 3 U Battery Box
(Optional) Optional
28
--------------------------------------
More Power, More Effciency, Less Space..
Hot Swappable Modular UPS..
PAY AS YOU GROW
10~1560kVA
PEX-PM10kVA | PEX-PM20kVA Power Module
PEX10-30kVA | PEX20-60kVA
PEX10-50kVA | PEX20-100kVA
PEX10-100kVA | PEX20-200kVA
Features
• Hot swap batteries and modules
• High frequency and double conversion
on-line technology
• Advanced PFC technology
• 3U frame, rack-mounted and tower convertible
UPS Cabinet Module Control
• EPO function
Control Panel Panel
• Wide input voltage range
• Fully digitized microprocessor control
• Parallel redundancy
single module(3U)
• Advanced battery management
• Lightning and surge protection, short circuit
and overload protection
• Multilingual LCD and LED display
10KVA / 20KVA 3:3 phase
• EMI/RFI noise filter
• Smart RS232 communication with monitoring
software
• Optional SNMP card slot
Battery Cabinets 3 U Battery Box
(Optional) Optional
28