INFINITYPOWER / MODEL VE PARÇA NUMARASI
HMPS 60
High Efficiency MegaPower · Güç sürekliliği için yüksek kapasiteli özel UPS serisi.
Bu model hakkında bilgi alın ↗Teknik etiketler ve değerler orijinal İngilizce kataloğu izler. “/”, boş değerler ve üretici tutarsızlıkları korunmuştur; nihai model seçimini ekibimizle doğrulayın.
High Efficiency MegaPower Series — Technical Specifications
PDF · sayfa 23 ↗| Teknik özellik | HMPS 60 |
|---|---|
| General | |
| Capacity(VA/Watts) | 60k/60k |
| INPUT | |
| Nominal voltage | 380/400/415Vac (3Ph+N+PE) |
| Operating voltage range | 138~485Vac for 40% load; 305~485Vac for full-load |
| Operating frequency range | 40~70Hz (50/60Hz Auto-Sensing) |
| Power factor | ≥0.99 |
| Harmonic distortion (THDi) | ≤2.5% Linear load |
| Bypass voltage range | Max.voltage:220V:+25% (Optional+10%,+15%,+20%) 230V:+20% (Optional+10%,+15%) 240V:+15% (Optional+10%) Min.voltage:-45% (Optional-20%,-30%) |
| Frequency protection range | 50/60Hz±10% |
| Generator input | Support |
| Invertor/Rectifier Topolgy | Trasnformerless 3IGBT with PWM |
| OUTPUT | |
| Output voltage | 380/400/415Vac (3Ph+N+PE) |
| Voltage regulation | ±0.5% |
| Power factor | 1.0 |
| Output frequency / Line Mode | ±1%/±2%/±4%/±5%/±10% of the rated frequency (Optional) |
| Output frequency / Bat. Mode | (50/60±0.2%)Hz |
| Crest factor | 3:1 |
| Harmonic distortion (THDv) | ≤1.5% with linear load ≤2.5% with non linear load |
| Overload / AC Mode | Load≤110%: last 60min, ≤125%: last 10min, ≤150%: last 1min, >150%:turn to bypass immediately |
| Overload / Bypass Mode | 135% overload long time; >1000% overload 100ms |
| EFFICIENCY | |
| Online/HFM | 97.1%/99% |
| BATTERY | |
| Battery voltage | LI-ion optional Optional Voltage: ±180/±192/±204/±216/±228/±240/±252/±264/±276/±288/±300Vdc(30/32/34/36/38/4 0/42/44/ 46/48/50pcs optional); 360Vdc~600Vdc (30~50pcs, 30pcs default, 36~50pcs output power factor 1.0; 32~34pcs output power factor 0.9; 30pcs output power factor 0.8) LI-ion optional |
| Battery voltage | LI-ion optional Optional Voltage: ±180/±192/±204/±216/±228/±240/±252/±264/±276/±288/±300Vdc(30/32/34/36/38/4 0/42/44/ 46/48/50pcs optional); 360Vdc~600Vdc (30~50pcs, 30pcs default, 36~50pcs output power factor 1.0; 32~34pcs output power factor 0.9; 30pcs output power factor 0.8) LI-ion optional |
| Battery type | LI-ion optional Optional Voltage: ±180/±192/±204/±216/±228/±240/±252/±264/±276/±288/±300Vdc(30/32/34/36/38/4 0/42/44/ 46/48/50pcs optional); 360Vdc~600Vdc (30~50pcs, 30pcs default, 36~50pcs output power factor 1.0; 32~34pcs output power factor 0.9; 30pcs output power factor 0.8) LI-ion optional |
| Charge Current (charge current can be set according to battery capacity installed) | 20A Max. |
| SYSTEM FEATURES | |
| Transfer time | Utility to Battery: 0ms; Utility to Bypass: 0ms |
| Backfeed protection | Support |
| Alarm | Overload, utility abnormal, UPS fault, battery low, etc |
| Protection | Short circuit, overload, over temperature, battery low, fan fault alarm |
| Remote LCD | Support |
| Communication | USB, RS232, RS485, parallel port, dry contact, intelligent slot, LBS, SNMP card (Optional), relay card (Optional) |
| ENVIRONMENTAL | |
| Operating temperature | 0oC~40oC |
| Storage temperature | 25oC~55oC(No battery) |
| Humidity range | 0~95% (Non condensing) |
| Altitude | <1500m, derating required when>1500m |
| Noise level | <55dB |
| PHYSICAL | |
| Dimension W×D×H (mm) | 250 x 828 x 868 |
| Net weight (kg) | 83 |
| STANDARDS | |
| Safety | IEC/EN62040-1, IEC/EN62477-1 |
| EMC | IEC/EN62040-2 (IEC 61000-2-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11) |